|
Features/Functions |
E.I.
UBG-16 Ultimate Bar Graph Engine Analyzer |
JPI EDM 700/800 |
Price
|
$1,962.00
Retail price w/ 6 EGTs, 6 CHTs and 1 TIT $2,416.00
Retail price w/ 6 EGTs, 6 CHTs, 1 TIT, OAT and Fuel Flow |
$2,360.00
Retail price w/ 6 EGTs, 6 CHTs and 1 TIT (JPI's EDM 700) $4,155.00
Retail price w/ 6 EGTs, 6 CHTs and 1 TIT (JPI's EDM
800) |
| Case size |
6"
(6.25" including bendable wires at back of case) |
7.25"
(9.1" including rigid connectors at back of case) |
| Stable one degree resolution |
Yes. |
May need to be set from 1° to
10° resolution to eliminate jumpy readings, according to JPI’s manual. |
| Segments per column |
21 |
20 |
| Normalized Mode with
Long-Term Memory for detecting trends and evolving problems |
Yes.
Compares current engine performance for each cylinder with engine
performance during previous flights. |
No.
Normalized mode only compares temperatures from the moment you entered the
Normalized mode. Once you exit that mode, the information is lost. |
| True Peak Detection |
Yes.
The UBG-16 will automatically return to the "LEAN" mode
as you continue to lean if a false peak is detected. |
No.
The JPI's EDM locks onto the first temperature drop, which could be a
false peak. |
| Independent Resolution for
the EGT Columns (the finer the segment
resolution, the more accurate the information). |
Yes.
EGT columns can be scaled to any temperature range to accommodate any
engine, (For example, if the top segment is set for 1650 degrees F. and
the bottom segment is set for 1250 degrees F., the segment resolution will
be +/- 20 degrees F.) |
No.
The resolution is dependent on the high TIT limit. The bottom segment
is factory set to 50% of the top segment. (For example, if the high
TIT limit is 1650 degrees F, then the bottom segment will be 825 degrees
F, which makes the segment resolution +/- 43 degrees F per bar.) |
| Number of Pilot-Programmable
Alarms: EGT overtemp alarms
EGT low temperature alarms
EGT differential alarm
CHT overtemp alarms
CHT low temperature alarms
TIT overtemp alarm
TIT low temperature alarm
Shock-cooling alarm |
6 individual EGT overtemp alarms (one for each cylinder)
6 individual EGT low temperature alarms (one for each cylinder)
Yes
6 individual CHT overtemp alarms (one for each cylinder)
6 individual CHT low temperature alarms (one for each cylinder)
1
1
1 |
None
None
Yes
1 Generic CHT overtemp alarm
None
1
None
1 |
| Automatically calculates and
digitally displays the temperature below peak EGT for each cylinder |
Yes |
No |
| Automatically
aids in Leaning on the Rich Side and the Lean Side of Peak |
Yes.
Using the UBG-16 for Lean
of Peak Operation &
Using the UBG-16 for Rich of Peak Operation |
No.
JPI's EDM automatically defaults to leaning on the rich side of peak. |
| Scan Mode |
Yes. Enters in Scan
Mode on request and stops on request or alarm. |
Yes. JPI's EDM will
enter scan mode whether you ask for it or not. |
| Stores Last Peak Reading and
Channel in Long-Term Memory |
Yes.
The cylinder that peaked first and the peak temperature
can be viewed at any time. |
No |
| All programming done from
the front panel |
Yes |
Yes |
| Additional Functions
Available: OAT
Oil Temperature
Carb Temp
Other Temps
Bus Voltage
Fuel Flow
Oil Pressure
RPM
Fuel Pressure
Manifold Pressure
Amps
Gyro Vacuum |
Yes w/ 2 alarms (high and low temp)
Yes w/ 2 alarms (high and low temp)
Yes w/ 2 alarms (high and low temp)
Yes w/ 2 alarms (high and low temp)
Yes w/ 2 alarms (high and low volts)
Yes w/ 2 alarms (high and low flow)
Yes w/ 2 alarms (high and low press)
Yes w/ 2 alarms (high and low RPM)
Yes w/ 2 alarms (high and low press)
Yes w/ 2 alarms (high and low press)
Yes w/ 2 alarms (high and low amps)
Yes w/ 2 alarms (high and low vacuum) |
Yes w/ no alarms
Yes w/ 2 alarms (high and low temp)
Yes w/ no alarms
No
Yes w/ 2 alarms (high and low volts)
Yes w/ 2 alarms (low fuel/low time)
No
Yes w/ no alarms
No
Yes w/ no alarms
No
No |
| Data Recording
|
Yes, up to 690 hours
by adding EI’s Black Box Data Recorder ($395.00 retail).
Also, GPS and data from six other instruments can be recorded at the same
time. The Black Box Data Recorder can be purchased when purchasing the
UBG-16 or can be added at a later date, without returning the instrument
to the factory.
UBG-16 Packages now
Include Memory (MUX-8A) |
Yes
|